js3845金沙线路(CHINA)有限公司-Baidu百科NO.1

D3000 Differential Pressure Switch Transmitter

四线制,4~20mA输出,最小0~60Pa,最大0~42MPa,显示、报警、输出三合一功能,拥有四位LED高亮度指示,双继电器,防水面板等特点。

DW268 Micro differential pressure transmitter

The DW268 micro-differential pressure transmitter utilizes variable capacitance sensing technology. This MEMS sensor boasts high sensitivity and long-term stability, along with strong anti-interference and anti-vibration capabilities, making it highly suitable for use in harsh environments such as marine, aerospace, metallurgy, power, and chemical industries. It is installed in a wall-mounted manner. In addition to the standard two-wire 4~20mA signal (four-wire 4~20mA when powered by 220V AC), the DW268 also incorporates two relay signals, allowing for alarming and control of the pressure difference in the monitored environment

DW300 Differential pressure transmitter

DW300 differential pressure transmitter is made of imported sensor chip, the sensor and amplifier circuit are highly integrated and assembled with aluminum alloy and stress quarantine technique. It has high sensitivity, high precision and strong anti-overload capability. Standard signal two-wire system 4 ~ 20ma or 0 ~ 10v output

D398 Pressure test bar

The D398 pressure calibration stick provides the pressure source for calibrating the differential pressure, pressure gauge and differential pressure/pressure transmitter, and can also be used to set the setting value of the differential pressure/pressure switch. An additional standard pressure gauge is required. Can be fine-tune to produce a pressure of from a few tens of Pa to 5 bar.

DW368 Micro differential pressure transmitter

The DW368 series of differential pressure transmitters utilizes variable capacitance sensing technology, featuring a two-wire 4~20mA signal (four-wire 4~20mA when powered by 220V AC) and a minimum measuring range of 0~25Pa. This MEMS sensor boasts superior sensitivity and long-term stability. The embedded stainless steel housing structure meets GMP standards for clean environments such as clean rooms and operating rooms. The product is elegant and features two relay signal outputs, allowing for arbitrary setting of alarm values. The night display window has dual-color backlighting, white and red, which can change color according to the preset alarm points on site, making it easier to control and adjust the differential pressure within the room. An optional buzzer alarm is available.

DW68 Micro differential pressure transmitter

DW68 micro differential pressure transmitter can quickly measure the pressure and differential pressure of air or non-corrosive gas, 2-wire 4-20MA signal output, minimum range 0 ~ 25Pa, maximum range 0 ~ 6KPa or ± 3KPa, standard 2-wire 4-20ma signal output, zero correction. And is a perfect combination of a high-precision differential pressure sensor and intelligent software technology. Applicable to clean rooms, dust collectors, HVAC, building automation and other micro-differential pressure measurement occasions.

D700 Molded Tilt Differential Pressure Gauss

The D700 molded tilting differential pressure gauge adopts a tilting/vertical structure and is filled with low-volatile red oil to indicate pressure values. It offers a wide measurement range and boasts higher resolution and reading accuracy at lower ranges. It can be used to measure positive pressure, negative pressure, and differential pressure values

DW808DR differential pressure transmitter

The DW808DR differential pressure transmitter is a high-precision and high-stability pressure transmitter, crafted using rigorously selected imported pressure sensors and precision chip-integrated transmitter circuits. It can reliably convert the measured pressure signal into a standard electrical signal ranging from 0-10V Dc or 4-20mA. This product is primarily used for pressure measurement and control in industries such as petroleum, chemical, power, metallurgy, light industry, pharmaceuticals, and food.

Stationmaster statistics:
XML 地图